Square » cutting

Baileigh Cold Saws, Manual and Semi Automatic Cold Cut saw,

admin — Fri, 09 Jul 2010 19:30:01 +0000

Baileighs line of miter cold saws consists of a manual cold saw, semi automatic and automatic cold saws for all small to high production requirements. The Baileigh Brand stands for excellent quality and support at a competitive price. All of our circular cold saws are built to the highest quality standards on the market today. Using this type of machine can cut tubing and pipe virtually burr free with a machined like finish at a tolerance of .0005″. Each coldsaw we offer will be in your production or fabrication shop offering decades of service. Please read on as we summarize our quality line of metal cutting saws.

The line up of manual and semi-automatic coolant lubricated metal cutoff saws consists of an 11″ and 14″ saw. Each machine has a heavy cast iron base frame with way support system and a cast sawing head that is mounted on a sturdy steel cabinet. The cabinet houses the electrical system, coolant system and has several storage compartments for housing cold saw blades and changeover tooling. A nice sturdy meter long material stop is included and lists inches and metric increments. The coolant sytem uses an industrial grade pump to properly wash away cut chips from the cold saw blade and the material being cut. The coolant system, using a synthetic 10 to 1 mixture extends blade life. Each metal cutting saw offers two cutting speeds to allow for the proper speeds for aluminum, stainless steel and mild steel. The head can swivel or miter up to 60 degrees in one direction and up to 90 degrees in the other direction allowing for 150 degree total swing. The vise is self centering so that the material always starts in the proper position on the blade regardless of the outside diameter of the material being cut. The vise uses a dual clamping system so the cut piece and stock bar or tube are both being held securely throughout the cutting process, which increases blade life. The vise jaws have a diamond groove that allows the cut on square tubing to begin on the pointed edge that increase blade life and speed of cut. A Baileigh metal cutting circular saw is heavily built with a very powerful AC motor coupled to an industrial grade gear box ready to provide decades of consistent sawing.

Duration : 0:4:32

[youtube UFXdAJGbZQ0]

Carmen Electra, Jenny McCarthy, Kelly Osbourne & Sword Swallower open Ripley’s Believe It or Not NY

admin — Sat, 12 Jun 2010 15:46:13 +0000

Sword Swallower Dan Meyer swallows a 24 inch sword and then uses it to cut the ribbon to kick off the Grand Opening of the Ripley’s Believe It or Not Odditorium in Times Square New York. Other guests include Lizardman, CatMan, Wolf Boy, Carmen Electra, Jenny McCarthy, Kelly Osbourne, and Mini Kiss. Believe It or Not!

Info:

http://www.cuttingedgeinnertainment.com

http://www.blue-n-gold.com/halfdan/swordswallower.htm

http://www.danmeyer.org

Subscribe:

http://www.youtube.com/Halfdan5

http://www.facebook.com/halfdan

http://twitter.com/Halfdan

http://danmeyer.tel

http://www.ripleys.com

Duration : 0:0:56

[youtube XS51cpsJYXE]

Laser Tube Cutting

admin — Thu, 08 Apr 2010 02:35:09 +0000

Tube Laser Cutting

Marks Brothers, Inc. has invested in a laser cutting system designed specifically for cutting tube and pipe. We can consolidate multiple conventional fabrication steps into one continuous cutting process on one machine.

True high production capabilities are achieved with loading full bundles of tubing. Self feeding–the machine loads a tube, measures length, updates the program based on that length, checks the tube for twist, finds the weld seam, cuts the parts, and off loads the finished parts while simultaneously loading and measuring the next tube. If you have tube production requirements you need to see what we can do.

Reductions in downstream assembly costs are achieved by laser cutting components with tighter tolerances than conventional methods, providing better fit up, and easier and faster assembly. We can provide almost any configuration of holes, slots, notches or joints including the designing of tabs and slots for your tubes to help fixture them for welding.

Either a simple cut tube with a single hole, or complex cutouts with 100s of holes, MBI can supply and process your round, square, rectangular or special shaped tubes with exceptional quality while saving you money.

If you need a quote or would like further information, please e-mail, sales@marks-brothers.com or check out our website, www.marks-brothers.com

Duration : 0:4:31

[youtube UeGVbtrrHjE]

“Do It From Scratch” With Vertical Tube Socks with up lighting pars

admin — Mon, 05 Apr 2010 00:22:57 +0000

“Do It From Scratch” With Vertical Tube Socks DJ Mikey Mike “Do It From Scratch” With Vert Tube Socks

Duration : 0:9:10

[youtube 4X2fqXDY0kw]

Taiwan SOCO – extreme speed tube cutting and deburring machine – www.soco.com.tw

admin — Fri, 26 Mar 2010 21:28:00 +0000

SA-76NC tube cutting machine may connected to BDB-70 double tube ends duburring machine. Besides the high speed tube cutting functions of SA-76NC, SA-76NC + BDB-70 has extreme speed in Loading, Feeding, Cutting, Transporting and Deburring. The powerful Automation Cell is capable of cutting various shapes of profiles such as round tube, rectangular, square and oval tube. The working capacity of SA-76NC + BDB-70 can up to 80mm for round tubing, and 70mm x 70mm for square tubing.

Duration : 0:2:37

[youtube 9ZbFnm4N7L0]

Cutting 2x2x1/4 square tubing for da frame

admin — Sun, 28 Feb 2010 02:15:04 +0000

cutting suquare tubin

Duration : 0:1:43

[youtube jQx_jogfT4w]

CNC Plasma Cutting Square and Round Steel Tube

admin — Thu, 25 Feb 2010 00:25:43 +0000

cnc machine plasma cutting rectangle tubing. Custom software allows for perfect coping and angle fit up. This machine can cut up to 8×8 inch w/.625 wall tubing 40 foot lengths

Duration : 0:2:11

[youtube vvJnDOIZzto]

Tracker CNC Plasma Cutter plasma cutting 2″ square tubing

admin — Fri, 19 Feb 2010 02:11:02 +0000

The capabilities are endless. In this video a Tracker Pro Table plasma cutting system is cutting a logo and company name into 2″ square tubing.
These tubes will be used as fence posts components for a patio area. The posts are intended to be backlit with neon tubes when the project is complete. Very, very creative.

Duration : 0:1:43

[youtube GNZAQuNWlV4]

Plasma Cutting square tubing with Kuka robot and Thermal Dynamics Plasma Cutter

admin — Thu, 18 Feb 2010 19:54:49 +0000

This video shows us cutting structural members for one of our Torchmate X CNC Plasma Cutting Tables. We manufacture, sell and use these plasma cutting robotic cells because of their ability to cut complex shapes into tubing that can not be accomplished on our CNC tables. It has the ability to cut any shape required into the tubing on multiple sides. This technology is invaluable to us and can be purchased for your shop relatively inexpensively. Visit http://www.industrialroboticsolutions.com or give us a call toll free at (866)571-1066 for details. We also manufacture and sell a full line of welding robots as well.

Duration : 0:0:56

[youtube rwdUs9ZgSKA]